top of page
  • Writer's pictureRadiationProtection

Frequently asked questions - lead glass

Q: What is safety rated glass? When is it required?

A: Impact resistant safety glass does not make glass shatterproof, it will simply keep the glass in one piece to prevent or limit injury if breakage occurs. Safety glass is required when glass occurs in a door, within 24 inches of a door, or within 18 inches of the floor. Typically, with regular plate glass, this would mean the glass needs to be tempered. However, it is not possible to temper lead glass. Fortunately, a safety rating can be achieved in other methods; one option is to laminate a layer of annealed plate glass to the lead glass. The other method is a surface applied security film, which is the most cost-effective way of producing x-ray lead safety glass.

Q: Is there a standard lead thickness for x-ray rooms?

A: There isn't a standard lead thickness required for radiation imaging rooms. Each room has many factors that contribute to the lead shielding requirements. Some of these factors are: the energy level of the machine (how much radiation it produces and which direction it is pointed), work load (how often the machine is used), the existing construction of the room (drywall and stud walls require more shielding than concrete walls), surrounding rooms (walls shared with a children's care unit will require much more shielding than walls shared with a storage closet), and other variables are taken into consideration when a physicist is calculating the lead shielding requirement. See next question for more info.

Q: What is a shielding report? How do I find out the lead equivalency required?

A: A radiation shielding report is a document written by a radiation physicist. It describes the lead thickness or lead equivalency required on each wall of your imaging room. Federal law stipulates that every facility must have a shielding evaluation done for every imaging room. They are also required if something changes in the room, like replacement of an imaging machine. In some areas, this can be handled by your county health department. Sometimes, the company you bought the x-ray machine from can acquire one for you. Due to a perceived conflict of interest, we cannot be involved in the shielding report acquisition. But if you have a shielding report and don't know how to decipher it, you can email it to us with your quote request and will we quote the proper products.

Q: Does lead glass have a tint? Is the a clear option?

A: All lead glass has a yellow hue due to the heavy metal content required to shield radiation. It's simply not possible to shield radiation and not have a yellow hue. But lead glass actually has the same amount of yellow as regular plate glass has of green. The bright edge of the glass creates the illusion that there is an extreme tint. Most people don't notice the color of plate glass because the edge of the glass is concealed in a frame, and it's the same in an x-ray room. It's nearly impossible to notice the color of lead glass when it's installed in a window frame.

28 views0 comments

Recent Posts

See All

Frequently asked questions - lead drywall

Q: My walls will be 8 or 10 feet high, why is the lead only up to 7 feet? A: Federal regulations require the lead shielding to go to a minimum of 7 feet because very few people are taller than 7 feet.

Bình luận

bottom of page